* Pressing ( ) instead of after inputting a calculation will display
the calculation result in decimal form.
Calc Settings > Fraction Result
Mixed Fraction; Improp Fraction
◆
Specifies either mixed fraction or improper fraction for display of fractions
in calculation results.
Calc Settings > Decimal Mark
Dot
◆
; Comma
Specifies whether to display a dot or a comma for the calculation result
decimal mark. A dot is always displayed during input. When dot is selected
as the decimal mark, the separator for multiple results is a comma (,).
When comma is selected, the separator is a semicolon (;).
Calc Settings > Digit Separator
On
◆
; Off
Specifies whether or not a separator character should be used in
calculation results.
System Settings > Contrast
See "Adjusting Display Contrast" (page 13).
System Settings > Auto Power Off
10 Min.
◆
; 60 Min.
Specify the amount of time until Auto Power Off is triggered.
System Settings > MultiLine Font
Normal Font
◆
; Small Font
Specifies the display font size when LineI/LineO or LineI/DecimalO is
selected for Input/Output. Up to four lines can be displayed while Normal
Font is selected, and up to six lines can be displayed with Small Font.
22
To Next Page
Loading...
