35
1
Power Supply
Removing
1. Turn off the Rugged PDA, and turn it over.
2. Slide the battery pack cover lock switches with the end of the stylus to
FREE (q), and remove the battery pack cover. Next, remove the battery
pack (w).
• The internal backup battery can maintain the data in the memory
for up to 30 minutes (if the backup battery is full) when the battery
pack is removed. If the backup battery is being discharged, the
data in the memory may be lost, it is best to attach or remove the
battery pack quickly.
• After removing the battery pack, cover the positive and negative
terminals with cellophane tape or something similar so they are
insulated before storing it.
w Remove the battery pack
q LOCK FREE
HA-C21BAT
IT-10_1/25-39-E.p65 06.6.15, 6:40 PM35
To Next Page
Loading...
Need help?
General
