11
EN
You can specify a font for the text you have just input or you can specify a
default font that is used automatically whenever you create a new label.
Important!
x
The font setting is applied to all of the characters. You cannot make multiple
specifi cations for specifi c characters.
To change the default font setting
1. Press to display the
SET UP
menu.
2. Use and to select
DEFAULT FONT
and then press
OK
.
3. Use and to select the font you want to use as the default, and then
press
OK
.
x
The default font you specifi ed will be used initially for all new labels.
When inputting text, you can use the procedure above to change the
font to another style, if you want.
To change the font of text you have just input
1. After inputting the text you want, press
FUNC
and then (Font).
2. Use and
to select the font you want to change to and then press
OK
.
x
This will apply the setting and return to the text input screen.
Character Size
You can select from among four different character sizes: Extra large, Large,
Medium, and Small.
Examples of each are shown below.
Extra large
Large
Medium
Small
Character size changes are applied to printed text only. The size of displayed
text does not change.
Important!
x
The maximum printable character size depends on the width of the tape
loaded in the printer and the number of lines of text to be printed.
x
The selected character size is applied to all of the characters. You cannot
make multiple specifi cations for specifi c characters.
To select a character size
1. Input the text.
2. Press
to display the size setting menu.
3. Use
and to move the pointer to the character size you want to use,
and then press
OK
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
