6
EN
1. Turn off the printer.
2. While pressing the location of the up arrow ( ), lift up the printer cover to
open and remove it.
3. Load batteries into the battery
compartment.
x
Be sure to use alkaline batteries.
x
Make sure the positive (+) and
negative (–) ends of the batteries
are facing correctly when you load
them.
4. Replace the printer cover.
Turning the Printer On or Off
Press to turn the printer on or off.
x
When you turn on the printer, the tape width selection screen will appear.
Use and to select the tape width you will use, and then press
OK
.
Resetting the Memory
You should reset the memory of the printer before using it for the fi rst time.
Important!
x
Resetting the printer memory clears its memory of all input data.
To reset the memory
1. Make sure that printer power is off.
2. While holding down
and the space key, press to turn power on.
x
This prompt confi rms whether or not you want to initialize the printer.
3. Release , the space key, and .
4. Press
OK
to initialize the printer or
to abort the reset operation
without initializing anything.
Display Language Setting
You can select English, German, French, Italian, Spanish, Swedish,
Portuguese, or Indonesian as the language to be used for display messages.
For information about how to change the language setting, see page 17.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
