Casio MZ-X300

7.25 NRPN (62H,63H)
Message Format: BnH 62H llH (LSB)
BnH 63H mmH (MSB)
n: MIDI Channel Number
ll: LSB Value
mm: MSB Value
7.25.1 Part Enable
Message Format: BnH 62H 00H
BnH 63H 22H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: Value (Note1)
ll: (Transmit:00H, Receive:Ignored)
Note1: For information about the relationship between setting values and send/receive values, see the “26.2 Off/On Setting
Value Table” in “VII Setting Values and Send/Receive Values” of this document.
Transmit Sent when a mixer part on/off setting is changed.
Receive Receipt changes the mixer part on/off setting.
7.25.2 DSP Parameter
DSP parameters can be changed by NRPN. The relationship between each parameter and NRPN numbers
is shown below.
Parameter MSB LSB Notes
DSP Parameter[1] 23H 00H
DSP Parameter[2] 23H 01H
: : :
DSP Parameter[16] 23H 0FH
For details about each DSP parameter, see ”VI DSP Parameter List”.
7.25.3 Tone
Tone parameters can be changed by NRPN. The relationship between each parameter and NRPN num-
bers is shown below.
Hex Layer Edit
16