Casio MZ-X300 - Registering Tone and Rhythm Setups; Saving Registration Data

Note1: For information about the relationship between setting values and send/receive values, see “26.10 EQ Frequency Setting
Value Table” in “VII Setting Values and Send/Receive Values” of this document.
Note2: For information about the relationship between setting values and send/receive values, see “26.11 EQ Gain Setting
Value Table” in “VII Setting Values and Send/Receive Values” of this document.
25.2 Compressor
Parameter Number Parameter Name Notes
Parameter[1] Attack
Parameter[2] Release
Parameter[3] Depth
Parameter[4] Wet Level
Parameter[5] Dry Level
25.3 Limiter
Parameter Number Parameter Name Notes
Parameter[1] Limit
Parameter[2] Attack
Parameter[3] Release
Parameter[4] Wet Level
Parameter[5] Dry Level
25.4 Enhancer
Parameter Number Parameter Name Notes
Parameter[1] Low Frequency
Parameter[2] Low Gain
Parameter[3] High Frequency
Parameter[4] High Gain
Parameter[5] Input Level
Parameter[6] Wet Level
Parameter[7] Dry Level
25.5 Early Reflection
Parameter Number Parameter Name Notes
Parameter[1] Wet Level
Parameter[2] Feedback
Parameter[3] Tone
Parameter[4] Input Level
Parameter[5] Dry Level
25.6 Phaser
Parameter Number Parameter Name Notes
Parameter[1] Resonance
Parameter[2] Manual Note1
Parameter[3] LFO Rate
Parameter[4] LFO Depth
Parameter[5] LFO Waveform Note2
Parameter[6] Input Level
Parameter[7] Wet Level
Parameter[8] Dry Level
40