When Stage Set.Chg NRPN is enabled by Instrument settings, number switching by bank select and
program change is ignored. For details about stage setups, see the Instrument’s User’s Guide.
9 Channel After Touch
Message Format: DnH vvH
n: MIDI Channel Number
vv: Value
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modu-
lation
depth. The modulation effect differs according to the tone being used.
10 Pitch Bend
Message Format: EnH llH mmH
n: MIDI Channel Number
ll: Value LSB
mm: Value MSB
Transmit Sent when the bender is operated.
Receive Receipt changes the pitch of the currently sounding note. The range of the pitch change
depends on the Bend Range value setting.
21
To Next Page
Loading...
