Configuring Digital Keyboard Settings
EN-59
English
■ REGISTRATION Screen
You can specify which current settings should be left unchanged when parameter settings are recalled using the
registration function.
• For details about setting items saved by registration, refer to the separate “Tutorial” manual.
Item Description Setting
Registration Area Selects a registration area.
Filter Edit Touching this button displays the REGISTRATION FILTER screen.
Use the screen to enable or disable overwriting of each setting item.
See page EN-40.
Sequence Enable Enables/disables registration sequence. Off, On
Sequence Data No. Shows the data number of the currently selected sequence data.
Position Shows what sequential number the current sequence is.
Bank Shows the bank number of the currently selected sequence data.
Reset Position Moves the sequence position to “Top”.
Position Synchro On: Automatically shows previous and following sequences in accordance
with the current position.
Off: Shows a fixed range of sequences, regardless of the current position.
Off, On
Sequence End Type Specifies the operation to be performed when the sequence “End” is reached.
No: No operation.
Repeat: Returns to item number 1, without changing the sequence number.
Next Seq Data: Advances to the next sequence data.
Sequence Data X: Goes to the Xth sequence data.
Sequence Edit Touching this button displays the REGISTRATION SEQUENCE EDIT
screen. Use this screen to specify the sequence data number to be edited.
See the separate
“Tutorial” manual.
MZX300_X500-ES-1A.indd 61 2015/10/07 15:46:50
To Next Page
Loading...
Need help?
General
