EN-22
Configuring Settings with the Keyboard
■ Tones
Parameter List
Parameter Settings
Operation
Type
(page
EN-19)
Description Remarks
Reverb
Off, 1 to 4
Default: 2
A Specifies the reverb of notes.
(page EN-7)
Tone selection
See page EN-5.
Default: GRAND
PIANO
(CONCERT)
A Assigns a tone to the keyboard.
(page EN-5)
Chorus
Off, 1 to 4
Default: Off
D Controls the breadth of notes.
(page EN-7)
Brilliance
–3 to 0 to 3
Default: 0
B Specifies the brilliance of notes.
Pressing [+] makes notes brighter
and harder. Pressing [–] makes
notes mellower and softer.
• To return the setting to its initial default (0),
press [+] and [–] at the same time.
Layer balance
–24 to 0 to 24
Default: –10
B Specifies the volume balance
between the main tone and the
layered tone. (page EN-6)
• To return the setting to its initial default
(–10), press [+] and [–] at the same time.
Lower Pedal Off, On
Default: Off
D When turned on and the BASS
(LOWER) tone is selected, pressing
the damper pedal or sostenuto
pedal will apply sustained
reverberation to the BASS
(LOWER) tone. (page EN-6)
Damper noise
Off, On
Default: On
D Enables/disables damper noise
output. (page EN-8)
Select layer tone
Off, On
Default: Off
D Enables or disables layering.
(page EN-6)
• BASS (LOWER) cannot be layered with
another tone.
• Configuring of layering settings is not
supported for recording function Track 2
recording.
Duet mode
Off, On, Pan
Default: Off
D Enables or disables the Duet Mode.
(page EN-10)
• When Pan is specified, Reverb and Chorus
effects cannot be applied.
To Next Page
Loading...
Need help?
General
