Casio PX-150 - KEYBOARD UNIT REMOVAL PROCEDURE

PX-150
– 22 –
I. Remove the KEYBOARD UNIT & CASE UNIT/LOWER
I-1. Undo three screws.
CASE UNIT/LOWERKEYBOARD UNIT
I-2. Have a table or base ready. Place the piano unit on the table or base, with keyboard facing down.
NOTE: The table or base to use must meet the following conditions:
• The height of the KEYBOARD UNIT and the table or base combined must be higher
than that of the CASE UNIT/LOWER.
• The table or base must be sturdy and steady enough to support the keyboard and
piano unit.
• The surface of the table or base will not damage the keyboard.
CASE UNIT/LOWER
KEYBOARD UNIT
Table or base