Casio PX-760 User Manual

as MIDI messages. The channel number of the sent message is in accordance with Instrument s part
numb er.
1.3.1 Auto Performance MIDI Send
This document describes what operation causes the transmission of each message. However, since there
are so many kinds of messages sent by the SMF player (PX-860,AP-460), this function is not mentioned
here as the operations.
2 Conditions that Disable Message Send and Receive
The main conditions when MIDI message send and receive are disabled by the Instrument are those
described below.
• While storage is selected as the USB device mode(PX-760/PX-860/AP-260/AP-460/PX-160)
3 Timbre Type Specific Operation
The operation that is performed for a received message depends on the current Timbre Type setting (see
 10.1 About Timbre Type ), which is the operation mode of each sound generator part. Applicable
information is provided in the explanations for each message.
7

Casio PX-760 Specifications

General

Keyboard	88 keys, Tri-sensor Scaled Hammer Action Keyboard II
Sound Source	Multi-dimensional Morphing AiR
Polyphony	128 notes
Tones	18 built-in tones
Reverb	4 types
Chorus	4 types
Brilliance	Yes
DSP	Yes (Preset for some tones)
Touch Response	3 sensitivity levels, Off
Lesson Function	Part on/off
Recorder	2 tracks, 1 song
Pedals	3 pedals (damper, soft, sostenuto)
Tuning Control	A4 = 415.5Hz ~ 440.0Hz ~ 465.9Hz
Speakers	12cm x 2
Amplifier Output	8W + 8W
Key Transpose	25 steps (-12 semitones to +12 semitones)
Connections	Headphones (Standard stereo jack)
Power Supply	AC adaptor: AD-A12150LW
Weight	31.5 kg
Metronome	Beats: 0, 2, 3, 4, 5, 6 (Tempo range: quarter note = 20 to 255)