4) When inserting the Compact Flash Card the label should be facing up
5) Enter 44449999 and depress SUBTOTAL
6) Next enter 20 and depress SUBTOTAL
7) At this time the machine will proceed to load the IPL off the CF Card with
numbers incrementing on the display indicating the new IPL is being
loaded.
8) Upon IPL uploading completion the following screen will appear:
11) Enter the initialization code of “2DD10” and depress SUBTOTAL –
DD= # of departments
TE-2200 enter 22510 TE-2400 enter 20410
1) Turn Mode Lock key to the PGM position
2) Enter 7 and depress the Subtotal key
3) Enter 20 and depress Subtotal
4) The display will prompt to select the desired program to load (if there are
multiple programs on the card)
5) Using the right arrow key on the keyboard (to locate the arrow key
positions, refer to the keyboard layouts below) select the desired customer
program and depress Cash to load.
Load Customer Program from Card to Machine
To Next Page
Loading...
Need help?
General
