What to do if my Casio UP-370 Printer won't turn on?
If your Casio Printer doesn't turn on, try the following: First, ensure that the power switch is in the ON position. Next, check the connector and make sure it is firmly connected. If the LED does not light up, verify that the power cable is properly connected. If the problem persists, consider replacing the AC adapter or the main PCB.
Why is the ERROR indicator on my Casio UP-370 lit?
If the ERROR indicator is lit on your Casio Printer, consider the following: If the printer is out of paper, replace it with a new roll. The automatic paper cutter may be locked, refer to section "4.3 PAPER JAM" for guidance. Also, try opening the printer cover using the cover open knob and then closing it firmly by pushing at the center.
What to do if printing from HOST is garbled on Casio UP-370?
If your Casio Printer is printing garbled output or not printing from the host, check the printer head and the main PCB and replace them if necessary. Also, ensure the connector is firmly set and the screws are tightened. Finally, refer to "5. THE DIP SWITCHES" to set the switches correctly, and then power cycle the printer.
What to do if the drawer kick doesn't work on Casio Printer?
If the drawer kick function is not working on your Casio Printer, try re-plugging the cable until you hear or feel a click, indicating a proper connection. Also, check the Y-cable to ensure it is connected in the correct order.
What to do if the ERROR indicator doesn't light up when Casio UP-370 paper is exhausted?
If the ERROR indicator on your Casio Printer does not light up when the paper is exhausted and the printer cover is closed, check the sensor and the main PCB, and replace them if necessary.
What to do if ERROR indicator doesn’t light up when Casio Printer cover is opened?
If the ERROR indicator on your Casio Printer does not light up when the printer cover is opened, check the sensor and the main PCB, and replace them if necessary.
General| Printing Method | Direct thermal |
|---|---|
| Type | Thermal Printer |
| Technology | Thermal |
| Print Resolution | 203 dpi |
| Interface | RS-232C / USB |
| Power Supply | 24 V DC |
To Next Page
