Scanning PLU start No. Starting number of automatic learning scanning PLU
item code. Set within the rage of 000001 to 200000.
Scanning PLU end No. Ending number of automatic learning scanning PLU
item code. Set within the rage of 000001 to 200000.
Service change2 rate Sets rate of service charge 2 which is applied between
certain start to end times. Set zero if service charge 2
is not applied.
Service change2 end time Sets end time of service charge 2. Set 00:00 if service
charge 2 is not applied.
Service change2 start time Sets start time of service charge 2. Set 00:00 if
service charge 2 is not applied.
Service charge rate. Sets service charge rate. Set zero if service charge is
not used.
Sign On Screen automatic display. Chooses to show clerk selection screen automatically
at signing off.
0: Yes
1: No
Sign On Screen style. Chooses sign on screen style.
0: Key style
1: Clerk ID (number) system
Sign On password for iButton. When iButton is used, it chooses whether to use
password of sign on clerk. Ineffective if iButton device is
not connected
0: Password not necessary
1: Password necessary
Start Cash register when Android
OS has started.
Selects whether to start sales management system
automatically or not.
0: Yes
1: No
Stock check when registering. Selects whether to check stock at item registration or
not.
0: No (No checking)
1: Error when out of stock (Check the stock)
2: Warning when stock running short
(Check the minimum stock)
3: Use both check
If you select “1” or “3”, items which are out of stock
cannot be registered.
Store Z data to SD card.(Reserved) Usage of SD card at Z operation.
0: Us an SD card, 1: SD card not
Store code Set store code maximum 6 digits, if necessary.
Sales database logs at TERMINALNUMBER as store code
6digits and terminal number 2 digits.
78
To Next Page
Loading...
Need help?
General
