Casio XJ-V2 - Adjusting the Volume Level; Muting the Audio

14
You can use the remote controller [VOLUME +] and [VOLUME –] keys to adjust the volume level of the
audio that is output from the AUDIO OUT terminal.
To adjust the volume level
1. Press the [VOLUME +] or [VOLUME –] key.
 This causes the “Volume” screen to appear on the projected image.
2. Press the [VOLUME +] key to increase the volume, or the [VOLUME –] key to
lower the volume.
3. After the setting is the way you want, press the [ESC] key.
To mute the audio
1. Press the [VOLUME +] or [VOLUME –] key to display the “Volume” screen.
2. Press the [ENTER] key.
 This stops output from the speaker.
3. To restore the audio, press the [VOLUME +] or [VOLUME –] key.
Adjusting the Volume Level (VOLUME)