EasyManuals Logo

Casio XJ-V2 User Manual

Casio XJ-V2
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
Getting Ready
This section explains how to select a location for the projector, how to connect its cables, and how to
perform other operations required before using it.
Locate the projector on a desk, table, or stand that is firm and level. Make sure that you allow
sufficient space around the sides and back of the projector for proper ventilation. The illustrations
below show how the projector should be oriented relative to the screen for optimum projection.
Setup Precautions
Use a conveniently located power outlet that you can reach easily when you need to unplug the
projector.
Do not located any objected within 30 cm (11.8 inches) around the projector. Particular care is
required to keep objects away from projector air intake and exhaust openings.
Airflow from air conditioning equipment can blow the heat being exhausted from the area around
the projector’s lens in a way that causes heat ripples to appear in the projected image. If this
happens, adjust the airflow of the air conditioning equipment or move the projector.
Setting Up the Projector
Screen
Make sure the projector is at a right angle to the screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio XJ-V2 and is the answer not in the manual?

Casio XJ-V2 Specifications

General IconGeneral
Number of colors1.073 billion colors
Native aspect ratio4:3
Projection distance- m
Projection technologyDLP
Contrast ratio (typical)20000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Service life of light source20000 h
Power sourceAC
AC input frequency- Hz
Power consumption (standby)- W
FocusManual
Offset72 %
Optical zoom1.1 x
Focal length range- mm
DVI portNo
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in0
Noise level37 dB
Preset modesPresentation
PlacementCeiling
Product typeStandard throw projector
Product colorWhite
Analog signal format system-
Supported graphics resolutions1024 x 768 (XGA), 1600 x 1200 (UXGA)
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Width270 mm
Height89 mm
Weight2900 g

Related product manuals