Casio XW-G1 - To Save a Chain in SMF Format to a Memory Card

Using the Step Sequencer
E-63
• Before performing the following procedure, insert a memory
card into the Synthesizer.
1. Hold down
bk
CHAIN until the CHAIN screen
appears.
2. Use the
bp
dial,
bq
buttons, or the
br
minus
(–) and plus (+) buttons to display the chain you
want to save.
3. Press
br
MENU.
4. Use the
bp
dial or
br
cursor (U, q, w, I)
buttons to move the item selection cursor (0)
to “SMF Save” and then press
br
ENTER.
• For the remainder procedure, perform the steps starting
from step 4 under “Saving Synthesizer Data to a
Memory Card” (page E-88)
• To save data to a memory card, see “Using a Memory
Card” on page E-86.
To save a chain in SMF format to a memory
card