Casio XW-G1 - Global Settings, MIDI, and Data Management

Other Useful Functions
E-79
You can use the
5
1/9 to MASTER sliders and the
4
step
(1 to 16) buttons to make instant changes in mixer settings.
1. Press
bn
MIXER.
This displays the mixer screen.
2. Use the
2
KEY SHIFT, SLIDER A/B, and 1-8/
9-16 buttons to change the part assigned to the
5
1/9 to MASTER sliders.
• Each press of one of the above buttons toggles the
button between being lit and unlit.
3. Move a slider to adjust the setting of the part
assigned to it.
• Use the
br
cursor (U, q, w, I ) buttons to select a
setting item.
4. Use the
4
1 to 16 buttons to toggle parts 01
through 16 between on and off.
• Each press of a button toggles it between lit (on) and
unlit (off).
• Holding a button down will turn that part on and turn all
other parts off (solo mode). Press the same button
again to exit the solo mode.
Example: To enter the solo mode for Part 08
Instant Adjustment of Settings using the
Sliders and Step Buttons
2
Unlit
Lit
Master
Ext
Unlit
Lit
Part 01 - 08
Part 09 - 16
Unlit
Lit
Part 01 through 08 (or 09 through 16)
All parts (leftmost slider only)
4
Lit
Hold down for a short while.