TABLE OF CONTENTS
INTRODUCTION
1. Introduction Page 1
2. Accessories Page 1
3. Specifications Page 1
4. Options Page 1
5. Guarantee Page 1
SET UP
1. Inspection of contents
2. Assembly Page 3
3. Connecting the machine Page 3
SETTINGS
1. Setting of moulding backing fences Page 4
2. Setting of joining angle Page 4
3. Setting of clamping Page 4
4. Selection of stapling positions Page 5
5. Selection of staples (wedges) Page 5
6. Changing the wedge cartridge Page 6
7. Location of vertical plunger Page 6
OPERATION
Joining of frame Page 7
MAINTENANCE
1. Changing the hammer Page 8
2. Maintenance of "wedge distributor" (bloc H) Page 9
3. Maintenance and lubrication Page 9
5. Releasing a jammed wedge Page 9
TROUBLE SHOOTING Page 10
SPARE PARTS - DRAWINGS
1. Parts list Page 11
2. Exploded views of CS 91 OJr&Sr Page 12 a,b,c,
3. Pneumatic diagram Page 13
To Next Page
Loading...
