Cassida 5520 - Double note detection; Half note detection

Cassida 5520 Digital Currency Counter
15
Please note that Cassida 5520 UV/MG counter, like all other counters with
integrated detectors present on the market, can not guarantee a counted bill
to be genuine or counterfeit. There are several reasons a genuine bill may be
recognized as counterfeit or vice versa. Possible reasons include: direct sunlight
exposure, worn out bill, excessively dirty bill or highly advanced counterfeiting
techniques used to produce the bill. Separate equipment may be required to
determine denitively whether or not a note is counterfeit.
4.3 Double note detection
Bills may stick to each other due to excessive dirt, folding or various other reasons.
The Cassida 5520 uses infrared light (IR) based technology to determine when
two bills are stuck together. This feature is activated automatically in all modes .
T he unit will start beeping and stop counting when a double bill is detected and
a “DBL” message will be displayed. The unit will continue to alert the user until
action is taken. To clear the error, all bills must be removed from the stacker. The
screen will automatically reset. All bills in the stacker must then be placed back in
the hopper and recounted .
Double note detection in adding mode :
When in adding mode the unit enables you to continue counting by automatically
correcting the total number of counted bills on screen. Move all bills from the
stacker to the hopper for recounting.
4.4 Half note detection
The Cassida 5520 incorporates infrared (IR) light sensors that notify users if a
half note passes through the counting mechanism. This feature is activated
automatically in all modes for your convenience.
The machine will beep and stop counting when a half note is detected and a
“HLF” message will be displayed on the screen. Move all bills from the stacker to
the hopper for recounting.
Half note detection in add mode: When in add mode, the 5520 enables you to
continue counting by automatically correcting the total number of counted bills
on screen. Move all bills from the stacker to the hopper for recounting.