3
1 2
4
5
6
1.3 Front and rear views
1. Control panel
2. Coin hopper Holds coins that need to be counted.
3. Coin trays Each tray holds a specific denomination of counted and
sorted coin.
4. Plastic housing When removed, provides access to the counting
mechanism for cleaning and repair purposes.
5. Rear access panel Provides easy access to the interior mechanism to remove
foreign objects and coins.
6. Power switch Turns the machine on and off.
7. Remote display port Connection for optional remote display.
7
1.4 Control panel
Name
Function
START/STOP
C
SET
BATCH
- (Minus)
+ (Plus)
REPORT
Starts or stops operation of the machine
Clears the display and resets the count
Shows batch quantities set for each denomination
Selects preset batch quantities
(0, 10, 20, 25, 50, 80, 100, 120, 150, 200, 300, 400, 500)
Decreases batch quantity by a value of 1
Also used to clear all batch quantities when pressed for 2-3 seconds
Increases batch quantity by a value of 1
Switches between value reporting and quantity reporting
Shows value (or quantity) of coins counted for each denomination
6
7
moving money forward
Cassida C200 coin counter/sorter/wrapper
To Next Page
Loading...
Need help?
General
