Cassida PRO Series User Manual

3.5.7 Pocket Capacity
This feature allows user to set the number of notes the reject pocket and stacker capacity.
If the reject pocket or stacker becomes full, the Zeus will stop and ash either a “REJECT
FULL” or “STACKER FULL” message. Clear the pocket and the Zeus will resume
normal operation.
[1] REJECT - Set the reject pocket
capacity to a custom amount. Use the
number pad to set the reject pocket
capacity to any number between 1 and
100 bills. Suggested ranges are: 10 to 30
for worn bills, 31 to 60 for normal bills and
61 to 100 for new bills. If the pocket
capacity is set too high dependent on the
type of bills being used, there is a risk of
bills being ejected from the reject pocket.
[2] STACKER - Select stacker capacity; 100,
150 or 200 (default = 150)
3.5.8 LAN Setting
The Zeus is equipped with an ethernet port
for network connectivity. To enable network
operation, various settings will need tuning
and testing depending on the network
conguration where the Zeus is installed.
Cassida does not provide networking
solutions at the moment, though an API
manual is available upon request to create
custom third party applications. The following
menu settings are available to setup and test
the network:
23 24
[1] DHCP Toggle - Enable or disable Dynamic Host Conguration Protocol
[2] CLIENT - Congure client settings
[3] SERVER - Congure server IP Address and Port
[4] MAC ADDRESS - View the Zeus MAC Address
[5] HOST NAME - Set the hostname.
NOTE: This value will remain through power off and depleted battery events.
[6] PING TEST - Send pings to test communication
3.5.9 Skin Menu
This feature allows user to select how the
interface is displayed. By default, the Zeus
is set to the [1] DARK SKIN for lower light
environments with high contrast and low eye
strain. The second option listed is the [2]
BRIGHT SKIN for brighter
working conditions.
3.6 Report Formatting and Setup
This feature allows the user to access daily, weekly, and yearly counting reports. In order
to use this function, a FAT32 formatted external storage device such as a ash drive
or hard drive must be connected to the USB port on the back of the unit. The external
storage device must be present during all counting and data collection in order for the
reports to be correctly stored. It is recommended that a dedicated storage device is
paired with each Zeus tool that requires reporting.Reporting intervals are dened as [1]
DAILY REPORT, [2] WEEKLY REPORT, or [3] MONTHLY REPORT.

Cassida PRO Series Specifications

General

Brand	Cassida
Model	PRO Series
Category	Banknote Counter
Language	English