Cassida PRO Series User Manual

For a DAILY REPORT, choose a date within the last 30 days to run the report and
press [ENTER] once the desired date is highlighted. This will display the report
contents and present the option to print the report using the [PRINT] key. Similarly
for weekly and monthly reports, select the preferred end date for the report or
month to view.
3.7 User Information
The user information screen displays and allows editing of common user features
and unit specic information.
3.7.1 Machine ID
The MACHINE ID is the custom name given to the unit if desired. By default, all
units are set to “ZEUS”. This eld is identical to the HOST NAME as used in the
networking screens, and may be used for network identication. Once this value is
set, it is stored in a special memory that will retain this value through power cycling,
unplugging, and battery depletion.
3.7.2 Receipt Header
This menu provide options to customize what is printed on receipts from the Zeus.
Fields included are NAME, ADDR, TEL, and FAX. If these values are set, every
receipt printed by the Zeus will contain this information at the top of the print.
Follow on-screen instructions for typing and saving these values.
3.7.3 S/W Version
Access this menu to view the current software version, UI version, and further
detailed information about the unit.
25 26
3.7.4 Factory Default Set
Once selected and conrmed, this action returns the Zeus to default factory settings.
3.8 Setting Hotkeys
Up to three user preferences, or hotkeys, can be saved. Hotkeys load the mode and all
related settings active at the time the user preference was saved to the selected hotkey.
The [4], [5], and [6] keys on the number pad
are hotkeys. To activate a hotkey, from the main
screen, press and hold the [4], [5], or [6] key.
Select [SAVE] to save the current conguration
for future use. To load a user setup, press and
hold the desired hotkey and select [LOAD]
to load a saved conguration. The saved
conguration will load automatically.
WARNING
Reseting to factory default will erase any customized
Hot-Keys and other settings made to the machine.
3.9 Dust Cover Menu/Control
Switch on/off dust cover auto closure when the counting starts.
(OFF = banknote processing will start with open dust cover).
HOT KEY (4)
Press [SAVE] to save current
configuration or press [LOAD] to
recall saved configuration
SAVE
LOAD

Cassida PRO Series Specifications

General

Brand	Cassida
Model	PRO Series
Category	Banknote Counter
Language	English