Feeding System Type:
Counting Speed:
Hopper Capacity:
Reject Pocket Capacity:
Stacker Capacity:
Banknote Size Range:
Display:
Interface:
Detections:
Power Supply:
Battery Supply:
Size (WxDxH):
Weight:
Ambient Temperature:
Relative Humidity:
Roller Friction
800/1000 Notes/Min
500 Note
10-100 Notes
100, 150, 200 Notes
4.7” x 2.4” - 7.1” x 3.5” (120 x 60 mm - 180 x 90 mm)
LCD 2.8” (71 mm)
USB-A, USB-B, RS-232, RJ-11, RJ-45, DB9
MG, UV, IR, CIS
100-240VAC, 50/60Hz
CR 2032
10.9” x 9.8” x 12” (276 x 250 x 305 mm)
17.6 lbs
50°F - 95°F (10°C - 35°C)
20% - 90% R.H. (Non - Condensing)
6.2 Contact Information
Technical support contact information:
Tel: (888) 800-0303
www.CassidaPro.com
6.3 Specications
29 30
MAINTENANCE, CONTACTS, AND SPECIFICATIONS
6.
6.1 Maintenance and Cleaning
Regular maintenance is required for optimal performance. All parts of the Cassida Pro Series
Zeus require daily care and cleaning. Zeus’ sophisticated sensors are very sensitive and
delicate components. Any dust or foreign matter that may adhere to the sensors may impact
the unit’s performance and operation.
NOTE: Clean the sensors before contacting a service technician.
Cleaning Instructions
Unplug the unit from all power sources before beginning the cleaning procedure.
•
Do not use solvents or harsh chemical cleaning solutions.
•
Clean the unit daily.
•
Clean sensors with a damp cloth or an air duster, soft bristled brush, using the Cleaning
Mode feature (please see section 3.5.X).
•
Clean the rubber rollers with the Cassida Cleanbill Pro cleaning card. You can perform
the roller cleaning by using the Cleaning Mode feature (please see section 3.5.X)
•
Empty the dust drawer daily.
•
Perform complete maintenance once every 3-6 months, depending on usage. Contact
your authorized Cassida service technician to schedule regular maintenance.
WARNING
Before performing any cleaning procedure, switch off the unit by pressing the power button on
the back of the unit to the “off” position.
Once powered off, unplug the unit from all power sources.
DO NOT use solvents or harsh chemicals such as alcohol to clean the unit.
Replace battery yearly with a CR2032.