In the event of incorrect operation or care of the unit, the manufacturer is not responsible
for damage caused to the unit or the operator. Cassida is not liable for damages
resulting from use of the unit for purposes other than for the intended purpose without
prior written consent from Cassida. Modications made to the unit by persons other than
Cassida or its authorized contractor/subcontractor are strictly prohibited. Any damages
resulting from the unauthorized modication of the unit are not the responsibility
of Cassida. For proper installation and/or transport of the unit, please consult an
authorized Cassida distributor or sales representative.
Please Note:
• The contents of this manual are subject to change without notice.
• While every effort has been made to include all the features and functionality of
your unit, specications stated in this manual may not reect all the features of
software updates. You may encounter differences in operation or functionality of
your unit.
• No part of the manual may be reproduced for commercial purposes without prior
written consent from Cassida.
• Due to power and safety specications, this product has been developed for use in
specic countries as described in the specications. Use in unspecied countries
is prohibited.
• This equipment has been tested and complies with the limits to a Class A digital
device, pursuant to Part 15 of the FCC Rules.
If you have questions about the operation of the Cassida Pro Series Zeus, please contact your
Cassida licensed reseller or refer to Cassida’s user portal at www.CassidaPro.com.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be observed including:
• Read this manual in its entirety.
• Do not use areas that could expose the unit to water or other liquids.
• Install on a at surface.
• Do not use in areas exposed to high temperature, humidity or smoke.
• For indoor use only.
• Store and operate the unit in a well ventilated environment and away from direct
sunlight, high intensity lighting, and magnetic elds that could interfere with suspect
bill sensors.
• Do not touch moving parts during operation.
• Keep foreign objects - paper clips, staples, etc. - away from moving parts or from
falling into the unit.
• Operate using a surge suppressor or power conditioner. When not in operation for
extended periods of time, disconnect the power cord.
• Prior to and during cleaning, unplug the unit. Follow the cleaning instructions and
maintenance schedule contained in this manual.
• Do not service your unit. Contact your authorized Cassida Pro technician,
distributor or sales representative for technical assistance.