Setting up the Transmitter
Turning on the Transmitter
1. Press and hold the power button on the
front panel of the device.
2. Green LED will light up indicating that
device is powered. If LED is slowly blinking,
it indicates that the Receiver is turned off.
Adjusting the volume
1. Press the «+» or «-» buttons located on the
front panel of the device.
2. LEDs will briefly light up indicating the
volume level.
If the battery is critically low the Transmitter will not turn on and an LED will
blink rapidly.In this case the battery can only be charged with the AC Power
adapter
To Next Page
Loading...
Need help?
General