7
Care and Maintenance
IMPORTANT
Before any maintenance is started involving electrical parts, the appliance must be disconnected from the
power supply.
If the oven has been in use, let the oven cavity and the heating elements cool down before attempting
any maintenance.
The oven exterior
As the oven has a stainless steel or enamel surface, you should use a nonabrasive cleaner. Any abrasive cleaner (including Cif) will
scratch the surface and could erase the control panel markings. Stainless steel can be effectively cleaned by simply using a dilute
solution of water and mild detergent and drying to a shine with a clean cloth.
Proprietary stainless steel cleaners are available. We recommend the CDA E-Cloth available from the CDA Sales Team for cleaning
stainless steel surfaces as this has been designed to prolong the finish of your appliance.
Inside of Oven
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water.
Suitable proprietary chemical cleaners may be used after first consulting with the manufacturers recommendations and testing a
sample on a small area of the oven cavity. Abrasive cleaning agents or scouring pads/cloths should not be used on the
cavity surface.
IMPORTANT:
• Steam cleaners must not be used when cleaning this appliance.
• Once care and maintenance is complete, ensure that all parts are correctly replaced before using the oven.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
