23
Mains Electricity Connection
Warning! this appliance must be earthed
We recommend that the appliance is connected by a qualied
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.T. and local regulations.
This hob is intended to be connected to permanent fixed wiring by
a double pole switch, having a contact separation of at least 3mm in
all poles. The switch must be positioned no further than 2m from the
appliance.
Please note:
• The mains cable must only be replaced by a qualied electrician
or service engineer and must be of equivalent or better rating (i.e.
2.5mm
2
, HO5V2V2/F).
• This appliance is intended to be connected to the mains supply with
a cable of cross section area 2.5 mm
2
. A larger cable will not fit the
terminal connections.
• The marking of the current rating of the fuse or circuit breaker
protecting this appliance should be marked on the socket outlet.
• Assembly and electrical connection should be carried out by
specialised personnel.
• When installing this product we recommend you seek the help of
another individual.
• Ensure that the brass links are securely tted. Failure to do so will
prevent the hob from operating correctly.
• Protection against live parts must be ensured after installation.
• Connection data is printed on labels on the hob casing close to the
To Next Page
Loading...
Need help?
General
