EasyManua.ls Logo

CDA hn9610 - Page 15

CDA hn9610
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
After approximately ve seconds, the “Zone timer indicator” will stop
ashing and the countdown will start.
The timer display will show the minutes remaining.
At the end of the timer, the selected zone will switch o and the hob
will beep for approximately one minute. To switch o the beep touch
either of the “timer keys.
To cancel the timer
Touch both the timer “+” and “-” keys together several times until the
“Zone timer indicator” for the timer zone you wish to cancel ashes.
That timer zone is then in “setting” mode.
Use the timer “-” key to reduce the time outstanding to zero.
The timer will remain in setting mode until approximately ve
seconds, after your last key touch.
Please note: Cancelling the timer will not switch o the zone. You
should switch the zone o manually if required.
Please note: the power level can be adjusted during the
countdown using the “+” or “-” keys.

Related product manuals