13
If the hardness of the water you use is above 63dE or if you are using
well water; you are recommended to use filter and water refinement
devices.
Please note: The level of water hardness is preset to level 3.
1. Press and hold down the “Programme Selection” button.
2. Press the “Power Button” to switch on the dishwasher.
3. Keep the “Programme Selection” button pressed until the five
“Programme Indicator” lights and the “End of Programme Indicator”
light flash.
4. To adjust the level, press the “Programme Selection” button
until the required level is selected. The “Programme” lights will
illuminate as in the table of water hardness settings below.
5. To store the selected water hardness level, press the “Power”
button.
To Next Page
Loading...
Need help?
General
