EasyManuals Logo

CDA wc140in User Manual

CDA wc140in
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
3. Replace the cap and the lower basket.
When the “Salt Warning” light on the control panel illuminates, you
should refill the salt compartment with salt only – do not add water to
the salt compartment after the first use.
You should run a programme immediately after adding dishwasher
salt, to prevent any damage to the dishwasher systems.
Softener Adjustment
The eciency of your dishwasher depends on the softness of the
tap water. To ensure best eciency, the dishwasher is equipped with
a system that reduces the hardness in the mains water supply. The
eciency will increase when the system is correctly set. To find out
the water hardness level of your water supply you can use the test
strip supplied or alternatively contact your local water board.
1. Open the testing strip.
2. Run water through the tap for one minute.
3. Hold the testing strip in water for one second.
4. Shake the testing strip after taking it out of the water.
5. Wait for one minute.
6. Check the number of marks on the strip to see the level of water
hardness.
No Lime
Very low lime content
Low lime content
Medium lime content
Lime content
High Lime content

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CDA wc140in and is the answer not in the manual?

CDA wc140in Specifications

General IconGeneral
BrandCDA
Modelwc140in
CategoryDishwasher
LanguageEnglish

Related product manuals