Celestron StarSense AutoAlign - Optical Tube Compatibility

I 7
LARGE BRACKET SMALL BRACKET
All Celestron Schmidt-Cassegrains Celestron 6” f/8.3 Refractor
All Celestron EdgeHDs NexStar 102SLT Refractor
NexStar 4SE Maksutov-Cassegrain NexStar 127SLT Maksutov-Cassegrain
NexStar 130SLT Reflector
All Celestron Reflectors and Refractors Packaged with the
Advanced VX Mount
All Celestron Reflectors and Refractors Packaged with the
Advanced CG-5 Mount
All NexStar GT optical tube assemblies
Several other optical tubes from other manufacturers which use
a similar finder dovetail base.
OPTICAL TUBE COMPATIBILITY
The StarSense camera replaces the finderscope on your telescope. Use one of the two included camera
brackets to attach the camera, the large bracket (already installed), or the small bracket. Refer to the chart
below to determine which bracket fits your optical tube.
Large Bracket
(pre-installed on camera in box)
Small Camera Bracket