Cellularline U-COM 6R - Function Priority and Firmware Upgrades; Function Priority Explained; Firmware Upgrade Process; Configuration Settings

11
8. FUNCTION PRIORITY AND FIRMWARE
UPGRADES
8.1 Function Priority
The headset prioritizes connected devices in the following order:
1. (Highest) Mobile phone
2. Bluetooth
®
Intercom
3. (Lower) Bluetooth
®
stereo music
Priority between intercom and music can be changed via the APP
Interphone unite or the Device Manager for Win/MAC.
A lower-priority function gets interrupted by a higher-priority function.
For example, stereo music will be interrupted by an Bluetooth
®
Intercom
Conversation; an Bluetooth
®
Intercom Conversation will be interrupted by an
incoming mobile phone call.
8.2 Firmware Upgrades
The headset supports rmware upgrades. Using the Device Manager utility
(available for PC and MAC on www.interphone.com) you can upgrade
rmware.
The USB Power & Data Cable (USB-C) must be connected to your computer,
then start Device Manager on computer and follow instructions step by step.
Interphone Unite APP can check the rmware version present on the
headset and inform you in case of a newer available rmware, but APP can't
ash the new rmware to headset.
9. CONFIGURATION SETTING
9.1 Headset Conguration Setting
With U-COM 6R on, press and hold INTERCOM button for 5 seconds, to
enter settings menu. Don't release the button until the led light is blue.
UCOM16
UCOM6R
Bluetooth
UCOM16
UCOM6R
UCOM16
UCOM6R
Bluetooth
UCOM16
UCOM6R
GPS
UCOM16
Bluetooth
UCOM6R
5 sec
5 sec
5 sec
5 sec
x 1
x 1
x 2
x 3
TFT
UCOM16
Cascopilota
COLLEGAMENTI
UCOM6R
Bluetooth
®
devices pairing
Con guration
menu
Con guration
menu
Con guration
menu
Con guration
menu
Phone
pairing
Phone
pairing
Second
mobile phone
pairing
GPS pairing
Main phone pairing (to be done with unit on)
Second phone pairing (to be done with unit on)
Gps SATNAV & TFT pairing (to be done with unit on)
TFT
UCOM16
Rider’shelmet
CONNECTIONS
To navigate through the settings, press once the VOLUME + button or the
VOLUME – button.
1. Phone pairing
2. Second Mobile Phone Pairing
3. GPS pairing
To conrm the following conguration menu options, press INTERCOM
button once.
4. Delete all pairings
5. Anycom pairing
6. Factory reset
7. Exit
9.1.1 Delete all pairings
Delete all Bluetooth
®
pairings stored in the device.
9.2 Device settings
You can change the device settings from the Device Manager utility
(available for PC and MAC on www.interphone.com) or from the Interphone
UNITE app.
Attention: the setting "Advanced Features" will enable the following
headeset features:
• Phone multiple speed dial