CEN-TECH 67980 User Manual

Safety Instructions Work Area Safety
1
1. Safety Instructions
IMPORTANT: To prevent electric shock, fire and/or personal injury
or damage, read this user’s manual first and observe the following
safety instructions.
6B1.1 Work Area Safety
 60BAlways perform automotive testing in a safe environment.
 61BKeep your work area clean and well lit. Cluttered benches and
dark areas may cause accidents.
 62BKeep clothing, hair, hands, tools, test equipment, etc. away from
all moving or hot engine parts.
 63BOperate the tool in a well-ventilated work area.
 64BDo not operate the tool in explosive atmospheres, such as in the
presence of flammable liquids, gases, or heavy dust.
 65BKeep a fire extinguisher suitable for gasoline/chemical/electrical
fires nearby.
 66BDo not use the tool around corrosive chemicals which can ruin
the photo quality.
 67BKeep bystanders, children and visitors away while operating the
tool.
 68BKeep the tool dry, clean, free from oil, water and grease. Use a
mild detergent on a clean cloth to clean the outside of the tool
when necessary.
7B1.2 Electrical Safety
 70BAvoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators.
 71BDo not expose the tool to rain or wet conditions. Water entering
the tool will increase the risk of electric shock.
 72BDo not abuse the cord. Never use the cord for carrying, pulling,
or unplugging the tool. Keep cord away from heat, oil, sharp
edges or moving parts.
 74BIf operating the tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCI) to protect supply.

CEN-TECH 67980 Specifications

General

Brand	CEN-TECH
Model	67980
Category	Analytical Instruments
Language	English