CEN-TECH 67980 - Troubleshooting

Troubleshooting
35
6. Troubleshooting
284BSYMPTOMS
285BPOSSIBLE
REASONS
286BSOLUTIONS
287BDisplay is on, but does not
show image.
288BCable connection
is loose.
289BCheck and
reattach.
290BImager head is
covered by debris.
291BInspect imager
head and clean
if needed.
292BLEDs on imager head are dim
at max brightness, display
changes between black and
white, and/or the color display
turns itself OFF after a short
period.
293BLow battery.
Charge battery.
295BThe tool will not turn on.
296BDead battery.
297BCharge battery.