Hot Wire Anemometer
11
10.2 AC Adapter Connection:
When the AC adapter is used, insert the plugs of the adapter into the USB connector on the side
panel.
Note:
When the AC adapter is connected while battery is inserted, the unit will be powered from
the adapter (the AC adapter has priority).
11. Maintenance
Clean the device and the window of the display with a clean, lint-free, antistatic and dry cleaning
cloth.
Do no use cleaning agents that contain carbon or benzenes, alcohol or anything
similar to clean the product since these substances damage the surface of the
measuring instrument. Moreover, these fumes are hazardous to health and explosive.
Do not use tools with sharp edges, screwdrivers, metal brushes or anything similar to
clean the device.
To Next Page
Loading...
