Center 332 - Safety Information for Hot Wire Anemometer Operation

Hot Wire Anemometer
1
1. GENERAL DESCRIPTION
Thank you for choosing our Hot Wire Anemometer. To ensure the safety and the best performance
of this instrument, we recommend you to read and follow the manual carefully before operation.
2. SAFETY INFORMATION
Read the following safety information carefully before attempting to operate or service the meter.
Use the meter only as specified in this manual; otherwise, the protection provided by the meter
may be impaired.
✽✽DANGER✽✽
The meter is not designed for use in gas mixtures other than air. DO NOT use the unit with
corrosive or other dangerous or explosive gas mixtures.
DO NOT be caught in working machinery.
DO NOT touch any exposed electrical wiring, non-insulated or live parts.
ENVIRONMENT CONDITIONS
 Altitude up to 2000 meters
 Relatively humidity: 90% max
 Operation ambient temperature: 0°C to 50°C
MAINTENANCE & CLEARING
 Repairs or servicing not covered in this manual should only be performed by qualified
personnel.
 Periodically wipe the case with a dry cloth. Do not use abrasives or solvents on this instrument.
SAFETY SYMBOLS
Comply with EMC
When servicing, use only specified replacement parts.
3. APPLICATION
 Measuring volumetric flow rates or flow velocities in ducts
 Measuring the temperature and humidity of flows
 HVAC system performance
4. FEATURES
 Fast response.
 Telescoping hot wire probe.
 Air flow measure: CMM、CFM.
 Air velocity measurement:
m/s, km/hr, ft/min, MPH, Knots & build in temperature ºC / ºF, humidity RH.
 Large LCD display with backlight.
 Min/Max/Avg & 2/3Vmax function.
 Data Hold function.
 With USB interface supply power.