Page 2SKU 97080 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Electrical Requirements 120 V~ / 60 Hz / 2.6 A
Power Cord Type 18 AWG x 3 C / 6 ft. long
Power Plug Type 3 Prong Grounded
Pressure Switch Type ON/OFF (Pull/Push) Rocker Switch
Air Inlet 1/4” - 18 NPT Female Thread
Fuse 3A
Compressor Style Oilless
Pump Style Single Cylinder
Maximum Air Pressure 100 PSI
Air Flow Capacity 1.0 SCFM @ 40 PSI
0.6 SCFM @ 90 PSI
Air Tank Capacity 3 Gallons
Accessories Thread Seal Tape / Quick Coupler
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES AND PRECAUTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, re, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite 1.
accidents.
Do not operate air compressors in explosive atmospheres, such as in the presence 2.
of ammable liquids, gases, or dust. Air Compressors create sparks which may
ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating an air tool. Distractions
3.
can cause you to lose control. Protect others in the work area from debris such as
chips and sparks. Provide barriers or shields as needed. Children should not be
allowed in the work area.
218549
Rev 07k
To Next Page
Loading...
