15
CM73522UMC.0112
[The figure in Section 3-6. Battery Charger and Adaptor]
(1) Battery Charger Unit - is a power supply source to recharge the battery pack. The
Output Plug (5) of the AC Power Adaptor (4) is plugged in the Adaptor Inlet (2).
(3) Charging Indicator Lamp - is on during recharging. If the battery is removed from
the charger unit, the lamp will be off.
(4) AC Power Adaptor - converts the AC main line voltage to 18 VDC output.
To Next Page
Loading...