VIEW IN DIFFERENT ANGLE
1. During VCD/MP3/CD playback, the ANGLE button on the IR remote control is not available.
2. During DVD playback, press the TITLE button on the IR remote control to display the TITLE
MENU on the a monitor, then select the ANGLE FUNCTION item and press the ENTER button on
the IR remote control to switch to ANGLE function playback mode, then press the ANGLE button
repeatedly on the IR remote control to view the different angles. (depending on the disc used)
TO SELECT THE FIRST TRACK/CHAPTER TO PLAY
1. During VCD/CD/MP3 playback, press the 1TOP button on the front panel to select the first
track/chapter to play. (dependant on the disc used for VCD)
2. In the state of DVD disc playing, the 1TOP button has no function.
TO SCAN DISC
1. During VCD/CD playback, press the 3INT button on the front panel to play the previous 10
seconds of each track/chapter on the disc (dependent on the disc used for VCD).
2. In the state of DVD/MP3 disc playing, the 3INT button has no function.
TO PLAY DISC IN RANDOM
1. During VCD/CD/MP3 playback, press the 4RDM button on the front panel to play in random or
select DISC REP (depend on the disc used for VCD).
2. In the state of DVD disc playing, the 4RDM button has no function. * In RDM mode, the TOP, INT,
RPT and NUMBER buttons have no function.
CHANGING LANGUAGE TYPE
1. During DVD playback, press the AUDIO button repeatedly on the IR remote control to select the
desired language type. (dependent on the disc used)
2.During MP3 playback, the AUDIO button on the IR remote control has no function.
3. During VCD playback, press the AUDIO button repeatedly to select LEFT VOCAL, RIGHT
VOCAL, MONO LEFT and MONO RIGHT sound modes, no language function is available.
4. During CD playback, press the AUDIO button repeatedly to select MONO LEFT, MONO RIGHT
and STEREO modes.
CENDVDLFM Page 17
To Next Page
Loading...
