Centurion D3 - Manual Gate Release Procedures; Centurion D3;D5 Manual Release; FAAC 844 Manual Release

20 - Centurion Sliding Gate Operators User Guide
All operators are fitted with a manual release mechanism. This is to allow the gate to
be operated in the event of a total malfunction of the equipment. It is also required if
the mains power has failed in the case of the A10 (without DC converter) and FAAC
operators.
Manual Release
ROTATE
THUMBWHEEL
CLOCKWISE
TO RELEASE
Rotate thumbwheel clockwise
until gate is free to move
FAAC844
Manual Release
Open manual override
CENTURION D3 & D5 FAAC 844
USE KEY TO
OPEN DOOR
Manual release
handle in closed position.
Open lock cover and insert key.
Turn key ¼ turn counter
clockwise to unlock.
Pull manual release handle
down to disengage manual
release
CENTURION D3 & D5
In this mode and for a particular application should the gate start to close too quickly
the "Auto-close" facility described earlier can be enabled.
The gate will now remain in the open position until either the "auto-close" has timed
out or a vehicle has driven through the entrance in which case the gate will start to
close immediately the vehicle has passed.