Ensure that all the standard considerations for a quality
gate installation are adhered to as detailed in
CENTURION’s detailed installation manuals. These
must include:
&
Correct access in and out of the premises
&
End-stops are mandatory and must be capable of stopping the
gate at rated speed
&
Guide-rollers and anti-lift brackets are correctly fitted
&
The gate mass, starting- and rated-pull-force limitations are not
exceeded
&
The D5-Evo is positioned correctly and does not protrude into the
driveway
Locate operator position
1. To ensure operator does not
protrude into driveway, install
base plate at least flush with
the driveway entrance.
2. Determine a suitable position
and vertical height for the
operator by considering
Figures A, B and C.
* Includes 3mm clearance required
between rack and pinion
To Next Page
Loading...
