Fit end-stops capable of stopping the gate at rated speed
Do not attempt to run the operator without first filling the
gearbox with lubricant
Oil filling procedure
1. Lift the cover of the operator.
2. Remove the battery so that
you can gain access to the
coloured filler plug.
3. Remove the coloured oil filler
plug by levering it out with a
screwdriver.
4. Empty the contents of the oil
bottle into the gearbox (80ml).
5. Refit the coloured oil filler
cap.
Oil specifications
Centurion product code:
OIL80ML0X0/H
Castrol SAF-XO 75w-90
Synthetic Final Drive
Lubricant
Make H>h to ensure gate will not jump over end-stop as
shown above
To Next Page
Loading...
