Cerber C816 - Page 26

26
After setting these options, press [#] key to confirm. The keypad buzzer will sound 6 confirmation beeps and the panel exits the [022] programming section, waiting for a new
command to enter another section or [#] key to exit the main programming menu.
Section [023]: External devices tamper
While the system is being within “main programming menu” select section [023] to establish if tamper of devices connected to the system that have their own box (i.e. keyfob
module) is enabled.
Key pressed
to toggle
option
KP-126Pz / KP-164Pz (LED keypads)
Description
KP16LCD / KP16LCDL (LCD keypads)
Zone
LED
ON OFF 1
st
line message
2
nd
line message
Enabled Disabled
[1] 1
enabled
*
disabled Keyfob module tamper
Keyfob tamper Enable k1 Disable k1
[2] 2
enabled
*
disabled PGM expander tamper
PGMExpTamper Enable k2 Disable k2
[3] 3
enabled
*
disabled Zone expander tamper
ZoneExpTamper Enable k3 Disable k3
Note: The default programmed options are marked with *.
Press the [1], [2] or [3] key in order to turn this options enabled/disabled and the keypads will display activate/deactivate status of the corresponding options.
After setting these options, press [#] key to confirm. The keypad buzzer will sound 6 confirmation beeps and the panel exits the [023] programming section, waiting for a new
command to enter another section or [#] key to exit the main programming menu.
Section [024]: Keypads tamper
While the system is being within “main programming menu” select section [024] to establish if own tamper of each keypad is enabled. The 1 to 8 options will be displayed according to
the table below:
Key pressed
to toggle
option
KP-126Pz / KP-164Pz (LED keypads)
Description
KP16LCD / KP16LCDL (LCD keypads)
Zone
LED
ON OFF 1
st
line message
2
nd
line message
Enabled Disabled
[1] 1
*
enabled disabled Keypad1’ tamper
Kpd1 Tamper Enable k1 Disable k1
[2] 2
*
enabled disabled
Keypad2’ tamper
Kpd2 Tamper Enable k2 Disable k2
[3] 3
*
enabled disabled Keypad3’ tamper
Kpd3 Tamper Enable k3 Disable k3
[4] 4
*
enabled disabled Keypad4’ tamper
Kpd4 Tamper Enable k4 Disable k4
[5] 5
*
enabled disabled Keypad5’ tamper
Kpd5 Tamper Enable k5 Disable k5
[6] 6
*
enabled disabled Keypad6’ tamper
Kpd6 Tamper Enable k6 Disable k6
[7] 7
*
enabled disabled Keypad7’ tamper
Kpd7 Tamper Enable k7 Disable k7
[8] 8
*
enabled disabled Keypad8’ tamper
Kpd8 Tamper Enable k8 Disable k8
Note: The default programmed options are marked with *.
Press the [1] to [8] keys in order to turn the appropriate option enabled/disabled and the keypads will display activate/deactivate status of the corresponding options.
After setting these options, press [#] key to confirm. The keypad buzzer will sound 6 confirmation beeps and the panel exits the [024] programming section, waiting for a new
command to enter another section or [#] key to exit the main programming menu.
Section [025]: Keypad zones activation
Each keypad connected to the system has 2 zones that can be activated by the use of programming section [025].
While the system is being within “main programming menu” select section [025] to activate/deactivate keypad zones. The 1 to 8 options will be displayed according to the table below: