Cerber C816 - Page 27

27
(first part)
Key pressed
to toggle
option
KP-126Pz / KP-164Pz (LED keypads)
Description
KP16LCD / KP16LCDL (LCD keypads)
Zone
LED
ON OFF 1
st
line message
2
nd
line message
Enabled Disabled
[1]
1
enabled
*
disabled Keypad1’ zone 1
Z1 of Kpd1
Enable k1
Disable k1
[2] 2
enabled
*
disabled
Keypad2’ zone 1
Z1 of Kpd2 Enable k2 Disable k2
[3] 3
enabled
*
disabled Keypad3’ zone 1
Z1 of Kpd3 Enable k3 Disable k3
[4] 4
enabled
*
disabled Keypad4’ zone 1
Z1 of Kpd4 Enable k4 Disable k4
[5] 5
enabled
*
disabled Keypad5’ zone 1
Z1 of Kpd5 Enable k5 Disable k5
[6]
6
enabled
*
disabled Keypad6’ zone 1
Z1 of Kpd6 Enable k6 Disable k6
[7] 7
enabled
*
disabled Keypad7’ zone 1
Z1 of Kpd7 Enable k7 Disable k7
[8] 8
enabled
*
disabled Keypad8’ zone 1
Z1 of Kpd8 Enable k8 Disable k8
Note: The default programmed options are marked with *.
Press the [1] to [8] keys in order to turn the appropriate option enabled/disabled and the keypads will display activate/deactivate status of the corresponding options.
After setting first set of options, press [#] key to confirm. The keypad buzzer will sound 3 beeps and will display the next 1 to 8 options according to the table below:
(second part)
Key pressed
to toggle
option
KP-126Pz / KP-164Pz (LED keypads)
Description
KP16LCD / KP16LCDL (LCD keypads)
Zone
LED
ON OFF 1
st
line message
2
nd
line message
Enabled Disabled
[1] 1
enabled
*
disabled Keypad1’ zone 2
Z2 of Kpd1 Enable k1 Disable k1
[2] 2
enabled
*
disabled
Keypad2’ zone 2
Z2 of Kpd2 Enable k2 Disable k2
[3] 3
enabled
*
disabled Keypad3’ zone 2
Z2 of Kpd3 Enable k3 Disable k3
[4] 4
enabled
*
disabled Keypad4’ zone 2
Z2 of Kpd4 Enable k4 Disable k4
[5] 5
enabled
*
disabled Keypad5’ zone 2
Z2 of Kpd5 Enable k5 Disable k5
[6] 6
enabled
*
disabled Keypad6’ zone 2
Z2 of Kpd6 Enable k6 Disable k6
[7] 7
enabled
*
disabled Keypad7’ zone 2
Z2 of Kpd7 Enable k7 Disable k7
[8]
8
enabled
*
disabled Keypad8’ zone 2
Z2 of Kpd8 Enable k8 Disable k8
Note: The default programmed options are marked with *.
Press the [1] to [8] keys in order to turn the appropriate option enabled/disabled and the keypads will display activate/deactivate status of the corresponding options.
After setting these options, press [#] key to confirm. The keypad buzzer will sound 6 confirmation beeps and the panel exits the [025] programming section, waiting for a new
command to enter another section or [#] key to exit the main programming menu.
Section [026]: Keypad options in partitions