Cerber C816 - Page 29

29
to toggle
option
Zone
LED
ON OFF 1
st
line message
2
nd
line message
Enabled Disabled
[1] 1
enabled
*
disabled “Away quick arming”
QuickArming A Enable k1 Disable k1
[2]
2
enabled
*
disabled “Quick instant stay arming”
QuickInstStay A Enable k2 Disable k2
[3] 3
enabled
*
disabled “Quick stay arming”
StayArming A Enable k3 Disable k3
[4] 4
enabled
*
disabled
Force arming without codes
ForceQArm A Enable k4 Disable k4
[5] 5
enabled
*
disabled
Card disarming needs confirmation of the
associated user code on the keypad
ConfCardDis Enable k5 Disable k5
Note: The default programmed options are marked with *.
Press the [1] to [5] keys in order to turn the appropriate option enabled/disabled and the keypads will display activate/deactivate status of the corresponding options.
After setting first set of options, press [#] key to confirm. The keypad buzzer will sound 3 beeps and will display next 1 to 5 options according to the table below:
(second part – partition B)
Key
pressed to
toggle
option
KP-126Pz / KP-164Pz (LED
keypads)
Description
KP16LCD / KP16LCDL (LCD keypads)
Zone
LED
ON OFF 1
st
line message
2
nd
line message
Enabled Disabled
[1] 1
enabled
*
disabled “Away quick arming”
QuickArming B Enable k1 Disable k1
[2]
2
enabled
*
disabled “Quick instant stay arming”
QuickInstStay B
Enable k2
Disable k2
[3] 3
enabled
*
disabled “Quick stay arming”
StayArming B Enable k3 Disable k3
[4] 4
enabled
*
disabled
Force arming without codes
ForceQArm B Enable k4 Disable k4
[5] 5
enabled
*
disabled
Card disarming needs confirmation of the
associated user code on the keypad
ConfCardDis Enable k5 Disable k5
After setting these options, press [#] key to confirm. The keypad buzzer will sound 6 confirmation beeps and the panel exits the [027] programming section, waiting for a new
command to enter another section or [#] key to exit the main programming menu.
Section [028] – PGM outputs assignment to partitions
While the system is being within “main programming menu” select section [028] to establish how PGM outputs are assigned to partitions. The 1 to 8 options will be displayed
according to the table below:
(first part – partition A)
Key
pressed to
toggle
option
KP-126Pz / KP-164Pz (LED
keypads)
Description
KP16LCD / KP16LCDL (LCD keypads)
Zone
LED
ON OFF 1
st
line message
2
nd
line message
Enabled Disabled
[1] 1
enabled
*
disabled PGM1 assigned to partition A
PGM1 ->A Yes k1 Not k1
[2] 2
enabled
*
disabled PGM2 assigned to partition A
PGM2 ->A Yes k2 Not k2
[3]
3
enabled
*
disabled PGM3 assigned to partition A
PGM3 ->A Yes k3 Not k3
[4] 4
enabled
*
disabled
PGM4 assigned to partition A
PGM4 ->A Yes k4 Not k4
[5] 5
enabled
*
disabled
PGM5 assigned to partition A
PGM5 ->A Yes k5 Not k5