Cerber C816 - Section [049]: 1 st Reporting Format; 2 nd Reporting Format

47
1st Rep.Format
DTMF AdemcoCID
Choose Sect:
2nd Rep.Format
DTMF AdemcoCID
After any digit was pressed, programming of the second panel account may be canceled by [#] key pressing. After cancellation by [#] key pressing, the keypad buzzer will sound 6
confirmation beeps, the system will keep the old value for second panel account and the control panel will go back within “main programming menu”
To exit the “main programming menu”, press [#] key.
Notes:
1. By default, the second panel account is 0000.
2. In order to identify itself to CS2, the control panel will use the second panel account, which is set in this section, only if the split (or double) reporting option was set and only while the
control panel is dialing the 2
-nd
CS phone number.
Section [049]: 1
st
Reporting Format / 2
nd
Reporting Format
Enter 2 groups of 2 digits, the first 2-digit group being the type of the format for CS1 transmission and the second 2-digit group being the type of the format for CS2 transmission.
Format
code
2
nd
line message Description
[00] 10pps4x2p1.4/1.8 10PPS,4x2 with parity,1400Hz kisson,1800Hz data
[01] 10pps4x2p2.3/1.8 10PPS,4x2 with parity,2300Hz kisson,1800Hz data
[02] 10pps4x2 1.4/1.8 10PPS,4x2 no parity,1400Hz kisson,1800Hz data
[03] 10pps4x2 2.3/1.8 10PPS,4x2 no parity,2300Hz kisson,1800Hz data
[04]
10pps4x2p1.4/1.9 10PPS,4x2 with parity,1400Hz kisson,1900Hz data
[05] 10pps4x2p2.3/1.9 10PPS,4x2 with parity,2300Hz kisson,1900Hz data
[06] 10pps4x2 1.4/1.9 10PPS,4x2 no parity,1400Hz kisson,1900Hz data
[07] 10pps4x2 2.3/1.9 10PPS,4x2 no parity,2300Hz kisson,1900Hz data
[20] 20pps4x2p1.4/1.8 20PPS,4x2 with parity,1400Hz kisson,1800Hz data
[21] 20pps4x2p2.3/1.8 20PPS,4x2 with parity,2300Hz kisson,1800Hz data
[22] 20pps4x2 1.4/1.8 20PPS,4x2 no parity,1400Hz kisson,1800Hz data
[23] 20pps4x2 2.3/1.8 20PPS,4x2 no parity,2300Hz kisson,1800Hz data
[24]
20pps4x2p1.4/1.9 20PPS,4x2 with parity,1400Hz kisson,1900Hz data
[25] 20pps4x2p2.3/1.9 20PPS,4x2 with parity,2300Hz kisson,1900Hz data
[29] 20pps4x2 1.4/1.9 20PPS,4x2 no parity,2300Hz kisson,1800Hz data
[30] 20pps4x2 2.3/1.9 20PPS,4x2 no parity,2300Hz kisson,1900Hz data
[40] 40pps4x2p1.4/1.8 40PPS,4x2 with parity,1400Hz kisson,1800Hz data
[41] 40pps4x2p2.3/1.8 40PPS,4x2 with parity,2300Hz kisson,1800Hz data
[42]
40pps4x2 1.4/1.8 40PPS,4x2 no parity,1400Hz kisson,1800Hz data
[43] 40pps4x2 2.3/1.8 40PPS,4x2 no parity,2300Hz kisson,1800Hz data
[44] 40pps4x2p1.4/1.9 40PPS,4x2 with parity,1400Hz kisson,1900Hz data
[45]
40pps4x2p2.3/1.9
40PPS,4x2 with parity,2300Hz kisson,1900Hz data
[46] 40pps4x2 1.4/1.9 40PPS,4x2 no parity,1400Hz kisson,1900Hz data
[47] 40pps4x2 2.3/1.9 40PPS,4x2 no parity,2300Hz kisson,1900Hz data
[10] DTMF4x2 AdemcoEx DTMF, 4x2 Ademco Express
[90] DTMF AdemcoCID DTMF Ademco Contact ID
Notes:
1. Switching format types between Contact ID and 4x2 formats is recommended to be performed without any active CS transmission.
2. Any time when the control panel is dialing the 1
-st
CS phone number, the panel will report in the 1
-st
reporting format which is set in this section, irrespective of way the alternate or split
reporting option was set.
3. The panel will report in the 2
-nd
reporting format which is set in this section, only if the split (or double) reporting option was set and only while the control panel is dialing the 2
-nd
CS phone
number.
Section [050]: “Ding Time” / “Ding Pause”
Enter 2 digits (HEX digits may be used) in order to set the “ding time and pause”, the first digit multiplied by 65ms being “ding time” and the second digit multiplied by 65ms
being “ding pause”.
, type one 2 digit number
or
[#]
, type one 2 digit number
or
[#]