Cerber C816 - Section [084]: Activation; Deactivation Moments of PGM4 as clock timer (hour: minute; hour: minute); Section [085]: Activation; Deactivation Moments of PGM5 as “clock timer (hour: minute; hour: minute); Section [086]: Activation; Deactivation Moments of PGM6 as “clock timer (hour: minute; hour: minute)

59
ActMomPGM4
Unprogrammed
DeactMomPGM4
Unprogrammed
Choose Sect:
ActMomPGM5
Unprogrammed
DeactMomPGM5
Unprogrammed
Choose Sect:
ActMomPGM6
Unprogrammed
DeactMomPGM6
Unprogrammed
Choose Sect:
1st PerTST
01:00
Choose Sect:
The keypad buzzer will sound 3 beeps after each 2-digit group and 6 beeps after the last one. Then the panel exits the section and will wait for a new command.
To exit the “main programming menu”, press [#] key.
Section [084]: Activation / Deactivation Moments of PGM4 as “clock timer” (hour: minute / hour: minute)
In order to establish the daily moments when the PGM4 defined as “clock timer” type is activating/deactivating automatically, enter the hour (00 to 23) and minute (00 to 59) for
activation moment and the hour (00 to 23) and minute (00 to 59) for deactivation moment.
The keypad buzzer will sound 3 beeps after each 2-digit group and 6 beeps after the last one. Then the panel exits the section and will wait for a new command.
To exit the “main programming menu”, press [#] key.
Section [085]: Activation / Deactivation Moments of PGM5 as “clock timer” (hour: minute / hour: minute)
In order to establish the daily moments when the PGM5 defined as “clock timer” type is activating/deactivating automatically, enter the hour (00 to 23) and minute (00 to 59) for
activation moment and the hour (00 to 23) and minute (00 to 59) for deactivation moment.
The keypad buzzer will sound 3 beeps after each 2-digit group and 6 beeps after the last one. Then the panel exits the section and will wait for a new command.
To exit the “main programming menu”, press [#] key.
Section [086]: Activation / Deactivation Moments of PGM6 as “clock timer” (hour: minute / hour: minute)
In order to establish the daily moments when the PGM6 defined as “clock timer” type is activating/deactivating automatically, enter the hour (00 to 23) and minute (00 to 59) for
activation moment and the hour (00 to 23) and minute (00 to 59) for deactivation moment.
The keypad buzzer will sound 3 beeps after each 2-digit group and 6 beeps after the last one. Then the panel exits the section and will wait for a new command.
To exit the “main programming menu”, press [#] key.
Section [089]: Hour / Minute for First Periodical test
Enter 2 groups of 2 digits, the first 2 digits for hour (00 to 23) and the second 2 digits for minute (00 to 59) when the system will send the first periodical test.
, type 2 groups of 2 digits
or
[#]
, type 2 groups of 2 digits
or
[#]
, type 2 groups of 2 digits
or
[#]
, type 2 groups of 2 digits
or
[#]
, type 2 groups of 2 digits
or
[#]
, type 2 groups of 2 digits
or
[#]
, type 2 groups of 2 digits
or
[#]