16-8
MANUAL MODE
Procedure
1. Connect the programmer and turn on the truck (see
specific paragraph)
Wait a few seconds for the data to load
2. Press F1 to select the Programmer function
3. Press F3 to select Manual mode
4. Press F1 to confirm your choice
Press F3 to return to the previous screen
5. Use F1 if the truck to be updated is CESAB
Use F3 if the truck to be updated is BT
F1 F2
F3
OK
OUT
Please select funct
Programmer
Save/Restore
PROG S/R
F1 F2
F3
OK
OUT
Programmer selected
Please select
Program mode
AUTO MANUAL
F1 F2
F3
OK
OUT
Manual download mode
selected proceed?
YES NO
F1 F2
F3
OK
OUT
Please select
truck type
CESAB BT
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
