Cessna 182T 2001 - Oil

SECTION 1 CESSNA
GENERAL MODEL 182T
OIL
Oil Specification:
MIL-L-6082 or SAE J1966 Aviation Grade Straight Mineral Oil:
Used when the airplane was delivered from the factory and should
be used to replenish the supply during the first 25 hours. This oil
should be drained and the filter changed after the first 25 hours of
operation. Refill the engine with MIL-L-6082 or SAE J1966 Aviation
Grade Straight Mineral Oil and continue to use until a total of 50
hours has accumulated or oil consumption has stabilized.
MIL-L-22851 or SAE J1899 Aviation Grade Ashless Dispersant
Oil: Oil conforming to Textron Lycoming Service Instruction No
1014, and all revisions and supplements thereto, must be used
after first 50 hours or once oil consumption has stabilized.
Recommended Viscosity for Temperature Range:
                                                                                                             

                                                                                                           


                                                                                                           


                                                                                                           


                                                                                                           


                                                                                                           


                                                                                                           


                                                                                                           


                                                                                                           

                                                                                                             
Temperature MIL>L>6082
SAE Grade
MIL>L>22851
Ashless Dispersant
SAE Grade
Above 27∞C (80∞F) 60 60
Above 16∞C (60∞F) 50 40 or 50
>1∞C (30∞F) to 32∞C (90∞F) 40 40
>18∞C (0∞F) to 21∞C (70∞F) 30 30, 40 or 20W>40
Below >12∞C (10∞F) 20 30 or 20W>30
>18∞C (0∞F) > 32∞C (90∞F) 20W>50 20W>50 or 15W>50
All Temperatures >>>> 15W>50 or 20W>50
NOTE
When operating temperatures overlap, use the lighter grade
of oil.
Oil Capacity:
Sump: 8 U.S. Quarts
Total: 9 U.S. Quarts
1-6 Apr 30/01